Flush Bottom Valves
|Connector Type||Flanged End|
|Temperature Of Media||High Temperature|
|Conn Flange In x Out||Max. 200 x 150 mm|
|Valve Size||150 mm|
|Country of Origin||Made in India|
are special purpose valves used in piping and vessels to drain out any product or slurry left in the pipe or vessel. These valves are most commonly used for dead space free draining or feeding of vessels and pipelines. They are also suitable for various mediums including highly viscous materials but also for vessels where rapid drainage is important.The Control Seal Flush Bottom Valves are available from 25 mm up to and including 250mm and from 150lbs up to and including 600lbs.
Flush Bottom Valve is a special purpose valve, which is used in piping, reactors and vessels to drain out abrasive, Slurry, Viscous Material or Semi Solid Media.
This type of valve is available in the size from ½” to 6” with different material of construction like Cast Iron, Cast Steel, SS 304, 316 or any special alloy to suit user requirements. The valves seating are Teflon ,Neoprene , Viton depending on the process. This type of valve is attached to the vessels on pad type nozzle. The disks in closed position match with the bottom of the vessel or piping leaving no room for hold up or stagnation.